Technical Specifications - Omnitronic MCP-8150 Bedienungsanleitung

TECHNICAL SPECIFICATIONS

Power supply:
or
Power consumption (max.):
Maximum power output:
Nominal power output:
Power output sine:
8 channel 4 Ohms :
8 channel 8 Ohms:
8 Ohms bridged:
Frequency range:
Damping-factor:
Distortion factor:
Signal to Noise Ratio:
Channel separation
(at 1 kHz):
Min. input sensitivity:
Input impedance:
Slew-rate:
Input-connectors:
Output-connectors:
Control elements:
Indicators:
Protection Circuits:
Construction:
Dimensions:
Minimum mounting depth:
Weight:
Please note: Every information is subject to change without prior notice. 12.08.2004 ©
MCP-6150
220-250 V AC, 50 Hz ~
110-120 V AC, 60 HZ ~
1400 W
6 x 160 W / 4 Ohms
6 x 150 W / 4 Ohms
6 x 150 W
6 x 100 W
3 x 300 W
22 - 25 000 Hz
> 200
0.01 %
97 dB
51 dB
0.77 V
12 kOhms (unbalanced),
22 kOhms (balanced)
> 30 V/µsec.
6 x XLR-female, 8 x Terminal block
6 x Terminal block
Power switch, Input attenuators (per
channel), Crossover
channel), High-/Lowpass (per channel)
Power, Bridge, Signal-Level LED-Meter,
Clip
Short-Circuit-Protection, Over-Current-
Protection, DC-Protection,
Protection, Soft-Start
Steel chassis, aluminium frontpanel
310 x 482 x 132 mm
320 mm
17.5 kg
29/29
220-250 V AC, 50 Hz ~
110-120 V AC, 60 HZ ~
1850 W
8 x 160 W / 4 Ohms
8 x 150 W / 4 Ohms
8 x 150 W
8 x 100 W
4 x 300 W
22 – 25 000 Hz
> 200
0.01 %
90 dB
51 dB
0.77 V
12 kOhms (unbalanced),
22 kOhms (balanced)
> 30 V/µsec.
8 x XLR-female, 8 x Terminal block
8 x Terminal block
Power switch, Input attenuators (per
On/Off (per channel),
channel), High-/Lowpass (per channel)
Power, Bridge, Signal-Level LED-Meter,
Clip
Short-Circuit-Protection, Over-Current-
Thermal- Protection,
Protection, Soft-Start
Steel chassis, aluminium frontpanel
310 x 482 x 132 mm
320 mm
19 kg
MCP-8150
Crossover On/Off
DC-Protection, Thermal-
10452430_V_1_0.DOC
(per