Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
• You can connect your stereo headphone to the jack-socket (OUTPUT UNBAL).
• Connect the connection cable of the power-unit with the AC IN-socket. Plug the power unit into your outlet
(Power-LED on).
• By turning the GAIN-control you can set the level of the input signal.
• The Clip-LED flashes when the output signal starts distorting.
• If you want to add phantom power to your microphone, press the PHANTOM POWER-button.
• Limiter: For switching the limiter in order to avoid clipping of the subsequent devices.
• Phase Reverse: In order to invert the cable occupation.
• +20 dB switch: for boosting very low input signals.
• Drive control: For boosting the output signal via the tube.
• When running the device, turn off the Phantom power at your mixer otherwise all PEAK LEDs will flash.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no servicable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Frequency range:
Input impedance:
Output impedance:
Maximum output level:
Maximum input level:
Dynamic range:
Input Connectors:
Output Connectors:
THD:
Dimensions:
Weight:
Please note: Every information is subject to change without prior notice. 06.04.2005 ©
Balanced XLR mounting-plug:
2
3
Stereo 1/4" jack-plug:
Tip
Right
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
9 V AC, 1500 mA
via power-unit included in the delivery
15 VA
10 Hz - 20 kHz
2 kOhms (XLR), 840 kOhms (1/4")
600 Ohms (XLR), 300 Ohms (1/4")
28 dBu (XLR), 22 dBu (1/4")
14 dBu (XLR), 22 dBu (1/4")
>100 dB
XLR and jack mounting sockets
XLR and jack mounting plugs
0.1 %
150 x 130 x 60 mm
1.2 kg
1: Ground
2: In Phase (+)
3: Out of Phase (-)
1
Ring Sleeve
Left
Ground
11/11
10355075_V_1_0.DOC
Werbung
Inhaltsverzeichnis
