Introduction; Mounting; 1: Mounting On Wall; 2: Mounting On Din-Rail - Danfoss Link HC Produkthandbuch

Installation Guide

Introduction

Danfoss Link™ is a wireless control system for a variety of heating systems.
The Danfoss Link™ HC (Hydronic Controller) is a part of this system allowing wireless control of
manifolds for water based floor heating/cooling.
Boiler relay Pump relay
External Front
Antenna cover
release

Mounting

The Danfoss Link™ HC should always be mounted in an horizontal upright position.

1: Mounting on wall

1. Remove front and side covers and mount with screws and wall plugs.

2: Mounting on DIN-rail

1. Mount DIN-rail parts.
Danfoss Link™ HC
Output LEDs
Output connections
Inputs:
Not in use
Away Function (external ON/OFF switch)
Heating/Cooling (external ON/OFF switch)
2. Click on DIN-rail.
VIFZL35X © Danfoss 04/2011
Install / Link Test
3. Release from DIN-rail.
GB
5