Configuration; 1: Adding Danfoss Link™ Hc To The System; 2: Configure Danfoss Link™ Hc - Danfoss Link HC Produkthandbuch

Installation Guide
Configuration
1: Adding Danfoss Link™ HC to the system
Adding Danfoss Link™ HC to a system is made from the Danfoss Link™ CC Central Controller. For
further information, see the Danfoss Link™ CC instruction manual: Configuration 7: Adding service
devices.
1. Select "Rooms and Devices".
4. Select Install / Link Test on HC.
2: Configure Danfoss Link™ HC
Configuration Danfoss Link™ HC to a system is made from the Danfoss Link™ CC Central Controller.
For further information, see the Danfoss Link™ CC instruction manual: Configuration 7: Adding service
devices.
1. Select "Rooms and Devices".
8
Danfoss Link™ HC
2. Select "Add Service Device".
5. If wanted, edit room name with
the letter keys.
2. Select "Manage Devices".
VIFZL35X © Danfoss 04/2011
3. Select "Begin Registration".
6. End with pressing "OK/Return".
3. Select device to configure.