Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
parameter t 03 53
.
Value
5
100
When pushing the pedal forward, with a raised sewing foot the start up delay, which can be set with parameter t
03 10, comes into force.
© 2010 Dürkopp Adler AG
Downloaded from
www.Manualslib.com
CAUTION
A holding force that is set too high may lead to damage to the magnets and the
control unit. Make absolutely sure that the magnets have a reliable power on period
(ED) and set a suitable duty cycle for it in accordance with the table below.
Duty cycle
5%
100%
high holding force (full activation)
manuals search engine
Effect
low holding force
49
Setting the basic functions
Werbung
Inhaltsverzeichnis
