Dmx-Controlled Operation; Quickdmx - EuroLite AKKU IP UP-4 QCL Spot QuickDMX Bedienungsanleitung

Control via IR remote
The Controller has several buttons with following functions:
Brightness up
Red
100% R + 24% G
100% R + 47% G
100% R + 71% G
100% R + 100% G
The device features a memory function. The last program selected will begin anew when the device is
restarted.

DMX-controlled operation

You can control the device individually via your DMX-controller. Every DMX-channel has a different
occupation with different features. The individual channels and their features are listed under DMX-protocol.
Please note, the starting address depends upon which controller is being used.

QuickDMX

Connect the transmitter, this could also be an AKKU IP UP-4 QCL, to the DMX controller. Set each
transmitter and the AKKU IP UP-4 QCL Spot QuickDMX into operation. Press the function button to activate
QuickDMX.
The QuickDMX status indicator shortly flashes red, green and blue. Afterward, it lights permanently
according to the selected transmission channel.
Set each transmitter and receiver to the same transmission channel. For this purpose, shortly press the
button "ID" on the device.
The selected transmission channel is indicated by the status indicator.
Channel Color
1 Red
2 Green
3 Blue
4 Yellow (red/green)
5 Cyan (green/blue)
6 Magenta (red/blue)
Thus, the wireless DMX network is set up and the receivers are paired to the transmitter. The assignment of
the receivers to the transmitter is kept memorized even after disconnecting the power supply.
As soon as the transmitter receives a DMX signal, the status indicator switches to red. Shortly afterward, the
status indicators of the receivers start flashing green to indicate that the DMX signal is being received. The
DMX-controlled units can now be controlled via radio.
After the operation, disconnect the mains plug of the power supply unit from the mains outlet, to prevent
unnecessary power consumption.
Brightness down
Green
90% G + 23% B
82% G + 46% B
72% G + 69% B
100% G + 100% B
OFF
Blue
22% R + 87% B
48% R + 75% B
67% R + 62% B
100% R + 100% B
35/44
ON
White
50% / 100% power
Strobe effect
Color Fading
Color Switching
00113517, Version 1.0