Yamaha DPX–1 Bedienungsanleitung Seite 20

Menu structure
I 2 <SIGNAL>
......... Adjustment cannot be made without any input signal.
Input signal
Video/Component/RGB
Video/Component
Video/Component
Video
Video/Component
Video
Video/Component
RGB
RGB
RGB
RGB
RGB
16
E-
ASPECT S
Sets the aspect ratio of displaying the image on the screen. "AUTO" automatically switches
to the most appropriate mode. "NORMAL" (THROUGH) projects the image as the input
signal is sent. "SQUEEZE" desqueezes the squeezed image. "ZOOM" projects the image
scaled up with a certain ratio. "ZOOM -SUBTITLE-" displays the subtitle. "THROUGH
-SQUEEZE-" displays the image with its width scaled up. Available items depend on the
"SCREEN ASPECT" setting and the type of input signals.
The "AUTO" setting may not switch to the most appropriate mode for some sources. If it
doesn't, make a setting manually.
"ZOOM -SUBTITLE-" has further items to be adjusted
SUBTITLE AREA: adjusts the subtitle area.
V SCROLL: adjusts the subtitle position by vertically scrolling the projected image.
SUBTITLE MASK
Darkens the brightness of the characters in the subtitles when playing the film in letterbox
with subtitles (except for HDTV).
MASK POSITION
Changes the effective height for the "SUBTITLE MASK" adjustment (except for HDTV).
3D Y/C SEPARATION
Suppresses the rainbow-like color crossing the image of fine vertical stripes or annoying dot
interference on the image edge when the video signal is input. This adjustment is available
only for the composite signal in NTSC mode.
NOISE REDUCTION
Effectively reduces the noise included in the luminance signal and color signal by digital
processing when playing the source with a relatively large amount of noise in order to
create a more vivid image (interlaced signal only, except for HDTV).
VIDEO TYPE
Selects VCR when playing video tapes in order to ensure synchronization, and selects DVD
when playing other sources.
SETUP LEVEL
Adjusts the black level difference of the image signal. Select 0% for a signal with no
difference from the pedestal level, and 7.5% for a signal with higher black level.
%
100
Pedestal level
0
DOT PHASE
Fine-adjusts the phase of the RGB signal input from the computer for clearest display of the
characters and lines of the image (except for DVI).
SIZE H
Adjusts the horizontal size of the projected image (except for DVI).
SHIFT H
Adjusts the horizontal position of the projected image (except for DVI).
SHIFT V
Adjusts the vertical position of the projected image (except for DVI).
SIGNAL STATUS
Displays the resolution and sync. frequency of the input signal.
Menu item
Image signal
Black level
Choice/adjustment range
AUTO/NORMAL/
SQUEEZE/ZOOM/ZOOM
S
-SUBTITLE-
(SUBTITLE AREA, V
SCROLL)/THROUGH/
THROUGH -SQUEEZE-
0 to 99
0 to 99
OFF/ON
–10 to 10
ON/OFF
OFF/1/2/3
DVD/VCR
0%/7.5%
0 to 31
–2047 to 2048
0 to 100
0 to 100
—