Remote Control; Installation; Menu; Image - Yamaha DPX–1 Bedienungsanleitung

Menu operation

Some items are adjusted by increasing or decreasing the value on
the scale, and others by selecting a number or a word.
KEYSTONE
KEYSTONE MODE
Press the RESET button to reset the parameter to the factory
setting. (Items without a factory setting cannot be reset.)
5.
Press the h or g button to move the cursor to the
next item.
First return to the menu group by pressing the ESCAPE or h
button if the next item belongs to the another menu group.
Then follow the previous steps 2—4 to continue menu setting.
SELECT

Remote control

6.
Press the MENU button to close the menu when
setting has been completed.

MENU

Remote control
20
E-
0
NORMAL FULL
or
Control panel
MENU
or
Control panel
I Submenu
Following is a list of the menu items that have a submenu.
Submenu operation varies according to the menu item selected.
Follow the steps of the applicable submenu operation group.
Menu items with a submenu
Menu group Menu item

IMAGE

WHITE BALANCE

SIGNAL

ASPECT*

INITIAL

COLOR SYSTEM
INPUT A SIGNAL
INPUT B SIGNAL
LANGUAGE
LAMP RUNNING
TIME
RESET

SETUP

INSTALLATION

DIGITAL LENS
SHIFT
R/C SENSOR
Operation group A: Press the SELECT or + button to open the
submenu. Select the desired parameter by pressing the h or g
button, and then press the ESCAPE or – button to close the
submenu.
Operation group B: Press the SELECT or + button to open the
submenu. Select the desired parameter by pressing the h or g
button, and then confirm the new setting by pressing the SELECT
button. After the setting has been confirmed, press the ESCAPE or
– button to close the submenu.
Operation group C: Press the SELECT or + button to open the
submenu. Select the submenu item by pressing the h or g button,
and then change the parameter by pressing the h or g button.
It is not necessary to confirm the new setting.
Operation group D: Press the SELECT or + button to open the
submenu, which is in the form of messages. Perform menu
operation by following the direction in the message. The submenu
for this group is explained in the section on pages 22 and 23.
-Exception-
* When the menu item "SCREEN ASPECT" in the menu group
"SETUP" is set to "16:9"
If "ZOOM -SUBTITLE-" is selected in the submenu for
"ASPECT", there is an additional menu to make your desired
setting. Press the SELECT button to open the additional menu.
There are two items, "SUBTITLE AREA" and "V SCROLL".
Select the item to be adjusted by pressing the h or g button.
Set the desired value by pressing the + or – button. Press the
ESCAPE button to close the additional menu.
Submenu operation
group
C
A
B
B
B
A
D
D
A
A
B