Herunterladen Inhalt Inhalt Diese Seite drucken

Yamaha DPX–1 Bedienungsanleitung Seite 18

Vorschau ausblenden Andere Handbücher für DPX–1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 78
Using this unit
I Turning off this unit
1.
When you have finished using this unit, press the
STANDBY/ON button.
There will be a message to confirm turning off this unit. Press
the STANDBY/ON button again to turn off this unit. The lamp
turns off and the
indicator flashes in orange while the fan
is rotating to cool the lamp for approximately two minutes.
This unit cannot be turned back on by pressing the STANDBY/
ON button in this state.
indicator
(flashes)
STANDBY/ON
LAMP
TEMP
/COVER
/FAN
STANDBY/ON
2.
When the lamp has cooled down, the
stops flashing and steadily lights in red.
3.
Turn off the power switch after making sure that the
fan has completely stopped and that the
indicator is lit in red.
Important
• While the fan is rotating and the
flashing in orange, never turn off the power switch
or unplug this unit. This will cause significant
damage to the lamp and may result in its shorter
life or failure.
14
E-
INPUT
AUTO
PATTERN
PATTERN
FILM
PATT
ESCAPE
SELECT
ASPECT
RESET
STILL
indicator
indicator is
I Indicators
There are four indicators on this unit to display the operating status
of this unit.
1
STANDBY/ON
1
Off
MENU
Lights in red
Flashes in green
Lights in green
Flashes in orange
2 LAMP/COVER
INPUT
Off
Lights in red
HIDE
Flashes in red (1-second intervals)
Flashes in red (0.5-second intervals)
3 TEMP/FAN
Off
Lights in red
Flashes in red
4 FILM
Lights in blue
Off
STANDBY/ON
INPUT
LAMP
TEMP
/COVER
/FAN
FILM
2 3 4
The power is turned off.
In the standby mode
Getting ready to start operation
Operating
Cooling the lamp
Normal
The lamp cover is not correctly attached.
The air filter cover is not correctly
attached.
The lamp usage has exceeded 1000
hours.
The lamp usage has exceeded 1100
hours.
The lamp has burnt out.
Normal
The temperature inside this unit is
abnormally high.
The cooling fan is out of order.
This unit has detected the interlaced
signal (480i) of 24-frame/second film
and is converting it to progressive
images.
Video signals other than the interlaced
signal (480i) of 24-frame/second film are
being input.
PATTERN
MENU

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis