Booster pump for ColorFree top
Technical data
Power supply
Performance
Fuse
rpm
Thermo switch
Water volume l/min:
Max. working pressure:
Max. inlet pressure:
Max. water temperature in supply line:
No responsibility is accepted for the accuracy of this information. Subject to technical
modifications and errors!
Use of the booster pump
The pump is to be used exclusively for the use intended by STORCH for ope-
ration in the Storch ColorFree top separating unit for operation of the STORCH
TurboWash. It is used to increase the water pressure from the water supply
The pump may only be mounted and operated in accordance with its intended
use on the motor provided by STORCH for this purpose and the intended appli-
cation.
Scope of delivery
Pump, metal fabric hose, 2 sealing rings, flow monitor mounted, ½" connecti-
on thread for water supply line to TurboWash, 2x hose protection for feed-th-
rough, fixing screws.
Installation
The pump may only be installed by trained staff. Proceed with caution.
230 V / 50 Hz
550 W
4.2 A
1,360
Yes
10 l
15 bar
5 bar
35 °C
51
Translation of the original instruction