Intended Use - Storch ColorFree top Originalanleitung

Intended use

The ST-7 flow monitor is used for monitoring volume flows with electrical
signal forwarding.
• Only group 2 fluids as per the Pressure Equipment Directive (PED) may be
used as media. If you are in any doubt, please contact the device manu-
facturer.
• The device may only be operated with an appropriate pressure generator
and voltage source.
• The device is not intended to be used by individuals (including children)
with limited physical, sensory and mental capacities or those lacking in
experience and/or knowledge, unless they supervised or receive instruc-
tions about how to use the device from a person responsible for their safe-
ty.
• Children are generally not allowed to operate this device.
Maintenance/Repairs
In case of technical issues, contact the STORCH Service Hotline without delay.
Translation of the original instruction 56