Technical Description; Device Components; Fitting The Automatic Charger And Putting It Into Service - Waeco PerfectCharge IU812 Montage- Und Bedienungsanleitung

PerfectCharge IU812
5

Technical description

An integrated, highly efficient, primary switched-mode regulator makes the
IU0U automatic charger small, light and very efficient as well as easy to
install. As well as its mechanical stability, the excess temperature and short
circuit protection ensure a high degree of operational safety. For this reason
it is suitable for mobile use in caravans, ambulances and emergency vehicles
and in motor boats and yachts.
Do not exceed the maximum battery capacity of 120 Ah. Reduced values
apply for led gel batteries, ask your battery retailer for details.
5.1

Device components

Item
in fig. 1, page 3
1
2
3
4
5
6 Fitting the automatic charger and
putting it into service
WARNING!
!
 Disconnect the mains plug before connecting or disconnecting
the DC voltage connection.
 Batteries with a cell short circuit may not be charged. There is a
danger of explosions due to the explosive gases.
 Nickel-cadmium batteries and non-rechargeable batteries may
not be charged with the IU0U automatic charger. The sleeves of
these batteries can burst in an explosive manner.
EN
Meaning
Fuse insert with glass fuse 10 A/250 V
"Power" indicator lamp
"Charging" indicator lamp
Connection terminal
Mains power cable (230 V)
Technical description
23