Hints And Tips - Electrolux ESL 6391RA Benutzerinformation

To set the appliance in user mode, do the
Reset function.
1. Press and hold, at the same time,
Program and MyFavourite until the
display shows the programme P1.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance. The display shows the
number and the duration of the last
set programme.
3. Set a programme.
• If you want to start the last set pro-
gramme, close the appliance door.
• If you want to set the MyFavourite
programme, press MyFavourite.
• If you want to set a different pro-
gramme, press Program again and
again until the display shows inter-
mittently the number and the dura-
tion of the programme you want to
set. If you want you can set the ap-
plicable options.
4. Close the appliance door. The pro-
gramme starts. The programme dura-
tion starts to decrease with steps of 1
minute.
Starting a programme with delay
start
1. Set the programme.
2. Press Delay again and again until the
display shows the delay time you want
to set (from 1 to 24 hours).
• The display shows intermittently the
programme number, the pro-
gramme duration and the delay
time.
• The Delay indicator comes on.
3. Close the appliance door. The count-
down starts.

8. HINTS AND TIPS

8.1 The water softener
Hard water contains a high quantity of
minerals that can cause damage to the
• When the countdown is completed,
the programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
Cancelling the delay start while
the countdown operates
Do the Reset function.
When you cancel the delay start
you have to set the programme
and options again.
Cancelling the programme
Do the Reset function.
Make sure that there is detergent
in the detergent dispenser before
you start a new programme.
At the end of the programme
When the programme is completed, the
display shows 0:00.
1. Press the on/off button or wait for the
Auto Off function to automatically de-
activate the appliance.
2. Close the water tap.
Important
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
appliance and bad washing results. The
water softener neutralises these minerals.
The dishwasher salt keeps the water soft-
ener clean and in good conditions. It is
ENGLISH 29