Cleaning And Care - Unold 28410 Bedienungsanleitung

8. The milk is heated in about 90 seconds and
the appliance stops automatically.
9. Remove the jug from the base.
10. Open the lid and remove it from the jug.
11. You can now pour the milk into a container.
12. If you wish to heat more milk, allow the
appliance to cool for 2 to 4 minutes. Then
clean the jug as described in Cleaning and
Care.

cleaning anD care

1. allow the appliance to cool before cleaning it.
2. Before you clean the appliance, always switch
it off and pull the plug out of the wall socket.
3. For hygienic reasons, clean the appliance
immediately after every use. otherwise, harm-
ful germs may form.
4. The cable, base and jug must not be
immersed in water or any other liquid or be
cleaned in the dishwasher.
5. Wipe the jug with a damp cloth and some
washing-up liquid. Do not use any abra-
sive products, steel wool, metal objects,
hot cleaning products or disinfectants,
since they may damage the appliance. This
13. Tip: When you are finished heating milk,
replace the milk frother accessory so that it
doesn't get lost.
Important: Make sure that there is
no milk residue in the jug to prevent
germs forming. clean the appliance
after every use.
applies especially to the non-stick coating
inside the jug.
6. Clean the inside of the jug with a soft cloth
and warm water with some mild washing-up
liquid. Do not try to scrape stubborn resi-
due off with hard objects, otherwise you
will damage the coating. If necessary, allow
water to soak in to remove residue. Then
rinse the jug thoroughly with warm water.
7. The appliance must be completely dry
before you use it again.
19 19