Grounding And Ac Power Cord Connections - Schumacher Ecobat EBC1 Benutzeranleitung

7. FOLLOW THESE STEPS WHEN BATTERY IS OUTSIDE OF THE VEHICLE.
WARNING
The POSITIVE (POS, P, +) battery post usually has a larger diameter than the
NEGATIVE (NEG, N, -) post.
7.2 Attach at least a 24-inch (61 cm) long 7 AWG (10 mm
NEGATIVE (NEG, N, -) battery post.
7.3 Connect the POSITIVE (RED) charger connector to the POSITIVE (POS, P, +) post
of the battery.
7.4 Position yourself and the free end of the cable you previously attached to the
NEGATIVE (NEG, N, -) battery post as far away from the battery as possible – then
connect the NEGATIVE (BLACK) charger connector to the free end of the cable.
7.5 Do not face the battery when making the final connection.
7.6 Connect charger AC supply cord to electrical outlet.
7.7 When disconnecting the charger, always do so in the reverse order of the connecting
procedure and break the first connection while as far away from the battery as practical.
7.8 A marine (boat) battery must be removed and charged on shore. To charge it
onboard requires equipment specially designed for marine use.

8. GROUNDING AND AC POWER CORD CONNECTIONS

WARNING
plug pins must fit the receptacle (outlet). Do not use with an ungrounded system.
DANGER
8.2
have a proper outlet installed by a qualified electrician. An improper connection can
result in a risk of an electric shock or electrocution.
8.3 USING AN EXTENSION CORD
The use of an extension cord is not recommended. If you must use an extension
cord, follow these guidelines:
• Pins on plug of extension cord must be the same number, size, and shape as
those of plug on charger.
WARNING WARNING
RISK OF ELECTRIC SHOCK OR FIRE.
WARNING
8.1 This battery charger is for use on a nominal 230V,
Never alter the AC cord or plug provided – if it does not fit the outlet,
A SPARK NEAR THE BATTERY MAY
CAUSE A BATTERY EXPLOSION. TO
REDUCE THE RISK OF A SPARK NEAR
THE BATTERY:
7.1 Check the polarity of the battery posts.
50/60Hz circuit. The plug must be plugged into an
outlet that is properly installed and grounded in
accordance with all local codes and ordinances. The
• 8 •
) insulated battery cable to the
2