Charging Indicator - Schumacher Ecobat EBC1 Benutzeranleitung

• Ensure that the extension cord is properly wired and in good electrical condition.
• Wire size must be large enough for the AC ampere rating of charger.
Recommended minimum AWG size for extension cord:
• 100 feet (30.5 meters) long or less – use an 18 gauge (1.0 mm
• Over 100 feet (30.5 meters) long – use a 16 gauge (1.31 mm
9. ASSEMBLY INSTRUCTIONS
9.1 Remove all cord wraps and uncoil the cables prior to using the battery charger.
10. FEATURES
7
6
11. CONTROL PANEL
LED INDICATORS
POWER (green) LED lit: The charger is connected to AC power.

CHARGING INDICATOR:

Yellow/orange LED lit: The charger is charging the battery.
Yellow/orange LED flashing: The charger is in abort mode.
Green LED pulsing: The battery is fully charged and the charger is in
maintain mode.
CLAMPS REVERSED (red) LED flashing: The connections are reversed.
BAD BATTERY (red) LED lit: The charger has detected a problem
with the battery. See Troubleshooting for more information.
NOTE: See Operating Instructions for a complete description of the charger modes.
3
1. Hook attachment
1
2. Charging status LED
2
3. Bad Battery LED
4. Power LED
5
5. Clamps Reversed LED
4
6. Battery clamps (quick-connect)
7. Ring connectors (quick-connect)
• 9 •
) extension cord.
2
) extension cord.
2