Herunterladen Inhalt Inhalt Diese Seite drucken

Grounding And Ac Power Cord Connections - Schumacher SPI1 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 19
7.4 Position yourself and the free end of the cable you previously attached to the
NEGATIVE (NEG, N, -) battery post as far away from the battery as possible – then
connect the NEGATIVE (BLACK) charger connector to the free end of the cable.
7.5 Do not face the battery when making the final connection.
7.6 Connect charger AC supply cord to electrical outlet.
7.7 When disconnecting the charger, always do so in the reverse order of the connecting
procedure and break the first connection while as far away from the battery as practical.
7.8 A marine (boat) battery must be removed and charged on shore. To charge it
onboard requires equipment specially designed for marine use.

8. GROUNDING AND AC POWER CORD CONNECTIONS

WARNING
DANGER
8.2
have a proper outlet installed by a qualified electrician. An improper connection can
result in a risk of an electric shock or electrocution.
8.3 USING AN EXTENSION CORD
The use of an extension cord is not recommended. If you must use an extension
cord, follow these guidelines:
• Pins on plug of extension cord must be the same number, size, and shape as
those of plug on charger.
• Ensure that the extension cord is properly wired and in good electrical condition.
• Wire size must be large enough for the AC ampere rating of charger.
Recommended minimum AWG size for extension cord:
• 100 feet (30.5 meters) long or less – use an 18 gauge (1.0 mm
• Over 100 feet (30.5 meters) long – use a 16 gauge (1.31 mm
9. ASSEMBLY INSTRUCTIONS
9.1 Remove all cord wraps and uncoil the cables prior to using the battery charger.
RISK OF ELECTRIC SHOCK OR FIRE.
WARNING
8.1 This battery charger is for use on a nominal 230V,
50/60Hz circuit. The plug must be plugged into an outlet
that is properly installed and grounded in accordance with
all local codes and ordinances. The plug pins must fit the
receptacle (outlet). Do not use with an ungrounded system.
Never alter the AC cord or plug provided – if it does not fit the outlet,
• 8 •
) extension cord.
2
) extension cord.
2

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis