Feed In Wire En; Risk Of Injury - Abicor Binzel MFS-V2 Betriebsanleitung

6 Putting into operation
6.5 Feed in wire
1 Cover
2 Pressure lever
Fig. 8 Feed in wire
1 Open cover (1) at M-Drive (2) .
2 Fold pressure lever (2) forward and open pressure rockers (4) .
3 Untie beginning of wire on the wire basket spool.
4 Insert wire through the inlet tube (5) over the drive rolls (6) into the distance adaptor (4).
5 Close pressure rockers (4) fold pressure lever (2) back.
6 Press the Inching trigger, feed the wire with the cover (1) open through the cable assembly into the
process-side drive.

Risk of injury

Bodily harm caused by the beginning of the wire.
• Keep process-side drive away from the body.
7 Close and lock cover (1) .
EN - 10
1 2
8
7 6
3 M-Drive
4 2 pressure rockers
CAUTION
3
4
5
5 Distance adaptor
6 drive rolls
MFS-V2
7 Inlet tube
8 Safety switch