Herunterladen Diese Seite drucken

Programming Cup Capacity; Daily Cleaning - K-FEE Grande Original Bedienungsanleitung

Kapselmaschine
Vorschau ausblenden Andere Handbücher für Grande:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Programming cup
EN
1
capacity
Button Factory setting
Setting range
[ml]
[ml]
45
30 – 100
105
80 – 200
200
100 – 240
The appliance is ready for
65
65 – 130
operation. Place desired cup
under the spout.
4
Before programming, always
insert a new capsule into the
machine.
The newly programmed fill
quantity
remains
stored
(also if power is interrupted).
It is also possible to reset the fill
quantities of the cups to the fac-
tory settings. To do this, read the
frequently asked questions on page
Hold down the button for
52.
the desired beverage (e.g.
"lungo") for at least 3 sec.
5
Open lever, capsule falls into
container.
38
2
3
Open lever and insert desired
Close lever completely.
capsule.
3 sec. min.
The respective symbol will
Press the same button again
start flashing on the display.
as soon as the desired cup
Then release the button - the
filling quantity has been
machine continues brewing.
reached. The machine stops
the brewing process and
saves the new cup filling
quantity.
1
2
Place a container under
Push button briefly to rinse
spout. Open lever and close
the appliance once.
again.
4
5
3 sec.
min.
Remove drip trays, spent
To reset the capsule counter:
capsule container and water
hold down the rinse button
tank.
for at least 3 sec.
7
8
8
Take drip trays apart.
Empty all the containers.

Daily cleaning

3
For health reasons it is
recommended to rinse the
machine
– 5 x before dispensing the first
beverage,
– 1 x every time after dispensing a
beverage.
Empty container and open
Risk of scalding!
lever.
Very hot water.
6
Risk of damage!
Before removing the drip
trays, make sure that the spout is in
the uppermost position.
Off
Resetting the capsule coun-
ter is described in detail on
page 40.
To switch the machine off,
briefly press the on/off but-
ton.
Risk of damage!
11
9
Only use a damp cloth and a
mild cleansing liquid (no scouring
agents or aggressive cleaning prod-
ucts). No not wash machine parts in
the dishwasher.
Clean and reassemble all
parts.
EN
39

Werbung

Kapitel

loading