Technical Data; Warranty; Ec Declaration Of Conformity - GreenWorks G24LT30M Bedienungshandbuch

EN
Problem Possible Cause
The line The machine is
keeps used incorrectly.
breaking.
The grass Cut tall grass at
winds ground level.
around the
trimmer
head and
motor hous-
ing.
The line The cut-off blade
does not cut becomes dull.
well.
Vibration The line is worn
increases down at one side
obviously. and not advanced
in time.
8

TECHNICAL DATA

Voltage
No load speed
Cutting head
Cutting line diameter
Cutting path diameter
Weight (without bat-
tery pack)
Measured sound pres-
sure level
Guaranteed sound
power level
Vibration
Battery model
Charger model
Noise value.
9

WARRANTY

(The full warranty terms and conditions can be found on
Greenworks webpage)
Solution
1. Cut with the tip of the
line, avoid stones, walls
and other hard objects.
2. Advance the cutting
line regularly to keep full
cutting width.
1. Cut tall grass from the
top down.
2. Remove no more than
8" in each pass to prevent
wrapping.
Sharpen the cut-off blade
with a file or replace it.
Make sure that the line on
both sides is normal. Ad-
vance the line.
24 V
8300±10％ min
-1
Automatic feed
1.65 mm
254mm/305mm
3.13 kg
L =82 dB(A), K = 3 dB(A)
PA PA
L = 96 dB(A)
WA.d
2 2
2 m/s , k=1.5 m/s
G24B2 and other BAG series
G24C and other CAG series
English
The Greenworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner's manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
10 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Riggaregatan 53, 211 13 Malmö , Sweden
Name and address of the person authorised to compile the
technical file:
Name: Peter Söderström
Address: Riggaregatan 53, 211 13 Malmö , Sweden
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construction:
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
• 2014/30/EU
• 2000/14/EC & 2005/88/EC
• 2011/65/EU & (EU)2015/863
Furthermore, we declare that the following (parts/clauses of)
harmonised standards have been used:
• EN 60335-1; EN 50636-2-91; EN 62233; EN 55014-1;
EN 55014-2:2015; EN ISO 3744; EN ISO 3744; ISO
11094; IEC 62321-7-2; IEC 62321-4; IEC 62321-5; IEC
62321-6; IEC 62321-7-1; IEC 62321-8; IEC 62321-3-1
Conformity assessment method to Annex VI / Directive
2000/14/EC.
String trimmer
Measured sound power level:
8
String trimmer
21227
See product rating label
See product rating label
L =93.3 dB(A)
WA