Technical Data; Warranty; Ec Declaration Of Conformity - GreenWorks GD60PS25 Bedienungshandbuch

EN
8

TECHNICAL DATA

Voltage
No load speed
Guide bar length
Chain stop
Chain oil capacity
Weight (without battery
pack)
Measured sound pressure
level
Guaranteed sound power
level
Vibration
Chain
Guide bar
Battery model
Charger model
9

WARRANTY

(The full warranty terms and conditions can be found on
Greenworks website https://www.greenworkstools.eu)
The Greenworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner's manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
10 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Name and address of the person authorised to compile the
technical file:
Name: Micael Johansson
English
60V DC
13 m/s
254 mm
< 2 s
80 ml
4.2 kg
L = 90 dB(A), K = 3
pA pA
dB(A)
L = 101 dB(A)
wA.d
2 2
< 2.5 m/s , K = 1.5 m/s
Q5058
MQ501058-1318TL
G60B2/G60B3/G60B4/
G60B6 and other BAC series
G60UC and other CAC series
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Herewith we declare that the product
Category: Polesaw
Model: GD60PS25(PSC403)
Serial number: See product rating label
Year of Construction: See product rating label
• is in conformity with the relevant provisions of the
Machinery Directive 2006/42/EC.
• is in conformity with the provisions of the following
other EC-Directives:
• 2014/30/EU
• 2000/14/EC & 2005/88/EC
• 2011/65/EU & (EU)2015/863
Furthermore, we declare that the following (parts/clauses of)
European harmonised standards have been used:
• EN 60745-1, EN ISO 11680-1, EN 55014-1, EN 55014-2,
EN ISO 3744, ISO 11094, IEC 62321-3-1, IEC 62321-4,
IEC 62321-5, IEC 62321-6, IEC 62321-7-1, IEC
62321-7-2, IEC 62321-8
Measured sound pow- L
er level:
Guaranteed sound L
power level:
Conformity assessment method to Annex V Directive
2000/14/EC.
The EC type-examination certificate number:MD-258 issued
by SGS Fimko Ltd (0598), Takomotie 8, FI-00380 Helsinki,
Finland.
Place, date: Malmö, Signature: Ted Qu, Quality Director
07.07.2021
8
: 97.9 dB(A)
WA
: 101 dB(A)
WA.d