Silvercrest SSJBE 300 A1 Bedienungsanleitung Seite 51

SAFETY CUT-OUT / RESET FUNCTION
► If the appliance turns itself off, the safety cut-out has tripped. The appliance
switches itself off before the motor can be damaged due to overheating,
e.g. because pieces of food have got stuck and the motor has blocked. The
appliance cannot be switched back on until you reset the safety cut-out.
Proceed as follows to be able to use the appliance again:
–
Set the On/Off switch
the power cable
down for 10–15 minutes.
–
Turn the housing lid
towards the
–
Remove the housing lid
–
Remove the fruit or vegetable pieces causing the blockage.
–
Carefully remove the sieve tray
over.
–
Insert the plug of the power cable
–
Press the RESET button
base
–
Pull the plug of the power cable
appliance base
–
Reassemble the appliance, insert the plug of the power cable
into a power socket and continue with juice extraction.
NOTE
► If the juice container
dripping out of the juice outlet
the stopper
under the juice outlet
SSJBE 300 A1
to the "O" position and pull the plug of
out of the socket. Allow the appliance to cool
anticlockwise until the
marking on the sieve tray holder
.
that is on the underside of the appliance
.
over.
is full and you want to empty it while juice is still
, block it off using the stopper
again after you have replaced the empty juice container
.
marking points
.
and turn the appliance base
into a mains socket.
out of the socket and turn the
GB │ IE
. Open
│ 47 ■