Possible Malfunctions - Bartscher PETIT Gebrauchsanleitung

o For washing, remove the fuse box with heating element. Never wash the fuse box with
heating element with excess amounts of water and do not immerse in water, just
wipe it with a slightly moist cloth. Water must not get inside the fuse box, as this may
lead to unsafe creepage currents and interference in the device operation.
o Wipe the control panel, external surface of the device and the power cord with a
moist cloth and mild cleaning agent.
o Dry all elements thoroughly before reassembling! Reassemble the device.
o If the device is not used for any lengthy period, clean it according to the
aforementioned description and store it in dry, clean place protected against cold,
sun and children. To protect the device against dirt, cover or pack it. Do not place any
heavy objects on the device.

7. Possible Malfunctions

Problem
Device connected to
power source, red stand-
by light does not come
on, and the device does
not heat up.
Green control light comes
on but temperature does
not rise.
Red stand-by light
comes on, but after
temperature is set the
green control light does
not come on.
Cause
• Plug improperly inserted
into socket
• Safety fuse disconnected
• Fuse box improperly
mounted
• Safety fuse has been
activated
• Micro fuse contact
malfunction
• Damaged safety
thermostat
• Broken heating element
fuse
• Damaged heating element
• Desired temperature has
been reached
• Damaged temperature dial
• Damaged control light
Removal
• Remove plug and insert
properly into socket
• Check fuse, connect
device to another socket
• Check that fuse box is
properly mounted
• Press the RESET button
on the fuse box
• Contact a sales agent
• Contact a sales agent
• Contact a sales agent
• Contact a sales agent
• Check functioning after
changing temperature
• Contact a sales agent
• Contact a sales agent
- 31 -