Possible Malfunctions - Bartscher PETIT Bedienungsanleitung

7. Possible Malfunctions

Problem
Unit connected to power
source, red stand-by
light does not come on,
and the unit does not
heat up.
Green control light comes
on but temperature does
not rise.
Red stand-by light
comes on, but after
temperature is set the
green control light does
not come on.
Heating element does not
heat after a short time.
The above mentioned trouble cases are just exemplary and to give you orientation.
Should these or similar troubles occur, please switch off the device and stop use
immediately. Contact qualified technicians or the manufacturer for inspection and
repair.
Cause
•
Plug improperly inserted
into socket.
•
Safety fuse disconnected
•
Fuse box improperly
mounted
•
Safety fuse has been
activated
•
Micro fuse contact
malfunction
•
Damaged safety
thermostat
•
Broken heating element
fuse
•
Damaged heating
element
•
Desired temperature has
been reached
•
Damaged temperature
dial
•
Damaged control light
•
Safety thermostat
activated
Removal
•
Remove plug and insert
properly into socket
•
Check fuse, connect
unit to another socket
•
Check that fuse box is
properly mounted
•
Press the RESET
button on the fuse box
•
Contact a sales agent
•
Contact a sales agent
•
Contact a sales agent
•
Contact a sales agent
•
Check functioning after
changing temperature
•
Contact a sales agent
•
Contact a sales agent
•
Press RESET button
on the fuse box
- 31 -