Cleaning - Bartscher PETIT Gebrauchsanleitung

•
If the deep fryer has been accidentally turned on with too little or no oil in the
chamber, it will automatically turn itself off at approx. 230
overheating. If this occurs, disconnect the device by removing its plug from the
socket and leave it to cool.
•
If the device has turned off to prevent overheating, it can be turned back on after
pressing the button marked RESET. This button is located at the rear of the
device and can be pressed using a long, thin object such as a wire.
Next, insert the plug into a socket and turn the device on.
CAUTION!
When finished using the unit, turn the temperature dial counterclockwise
to the turn-off point (marked on the control panel) and remove the plug
from its socket.

6. Cleaning

CAUTION!
Disconnect the unit from the power supply (unplug!) before cleaning.
The unit is not designed to be rinsed with running water.
Do not use a pressure washer to clean the device!
Be careful and do not let the water into the unit.
o Clean the device regularly.
o Before cleaning, disconnect the device from the power supply (pull the plug from the
socket!).
o Leave the device to cool down.
o Do not use harsh chemicals or scouring agents when cleaning, as they may damage
the deep fryer. Clean the deep fryer with mild cleaning agent. Stubborn dirt may be
spot soaked in order to remove it.
o Remove the basket, empty it and clean with warm water with a mild cleaning agent.
o Remove the oil chamber. After the oil has cooled, pour it carefully to the container.
Ensure the container is secure and stable.
o Wipe the oil chamber with a paper towel, then wipe it with a cloth soaked with warm
water with a mild cleaning agent. Finally, wipe it with the cloth soaked in fresh water.
- 30 -
°
C, to protect against