D) Adjust Trim - Reely Ghost Bedienungsanleitung

d) Adjust trim

Important:
It is recommended to fly within large unobstructed areas before adjusting trim.
Adjust the trim if the quadcopter does not hover in a neutral position when hands are off the
throttle and direction lever.
1. Adjust the trim during flight for immediate results.
2. Adjust the trim:
- Press once for small adjustments, press and hold for rapid adjustments.
- The transmitter will beep to indicate that an adjustment has been made.
- If there are no beeps it means you have reached the max. 50 adjustments.
- The default trim setting is indicated by a long beep. E.g. Pressing the Back trim button
5x, then pressing the Forward trim button 5x will take you back to the default setting.
- Settings will reset each time the quadcopter and transmitter are powered off.
Note down any trim settings and apply after unlocking the quadcopter/before flight.
Trim setting
38
Description
• Forward drift:
Press the Back trim button to
counteract it.
• Backwards drift:
Press the Forward trim button
to counteract it.
• Right drift:
Press the Left trim button to
counteract it.
• Left drift:
Press the Right trim button to
counteract it.