E) Adjust Speed; F) One Key Return; G) Led Colour Change - Reely Ghost Bedienungsanleitung

e) Adjust speed

Important
• Change the speed before take-off or while hovering.
• Do not adjust the speed while the quadcopter is moving.
• A higher speed setting will cause the battery to run down faster.
• It is recommended to fly within large unobstructed areas before adjusting speed.
1. If adjusting before take-off, first unlock the quadcopter:
- See section 13. → b) → 2. "Unlock the quadcopter".
- The quadcopter LED will be solid on when unlocked.
2. Press the SPEED button to cycle through speed settings:
Low (1x beep) → medium (2x beeps) → high (3x beeps).

f) One key return

This function returns the drone back to the position it launched from.
Important
• Make sure there are no obstructions along the return flight path.
• Before returning, increase or decrease the altitude to avoid any obstructions.
• Press and hold the RETURN button to initiate the return. A long beep will sound.
• Short press the RETURN button to stop the return. A short beep will sound.

g) LED colour change

1. Unlock the quadcopter. See section 13. → b) → 2. "Unlock the quadcopter".
2. Press the LED button to toggle through colour options.
39