Inhaltsverzeichnis; Introduction - Husqvarna 333R Mark II Bedienungsanweisung

Introduction..................................................................... 6
Safety..............................................................................7
Assembly...................................................................... 11
Operation...................................................................... 12
Maintenance................................................................. 15
Product description
This product is a grass trimmer/brushcutter with a
combustion engine.
Work is constantly in progress to increase your safety
and efficiency during operation. Speak to your servicing
dealer for more information.
Intended use
The product can be used with a grass blade or a trimmer
head to cut different types of vegetation. Do not use the
Product overview
(Fig. 1)
1. Grease filler cap, bevel gear
2. Bevel gear
3. Cutting attachment guard
4. Shaft
5. Handlebar
6. Start throttle button
7. Stop switch
8. Throttle trigger
9. Throttle trigger lockout
10. Handlebar clamp
11. Suspension ring
12. Clutch cover
13. Spark plug cap and spark plug
14. Air purge
15. Fuel tank
16. Muffler cover
17. Cylinder cover
18. Air filter cover
19. Choke control
20. Starter handle
21. Locking pin
22. Allen key
23. Spanner
24. Socket spanner
25. Trimmer head
26. Operator's manual
6
Contents
Troubleshooting............................................................ 18
Transportation and storage...........................................18
Technical data.............................................................. 19
Accessories.................................................................. 20
EC Declaration of Conformity....................................... 21

Introduction

product for other tasks than grass trimming and grass
clearing. Use a grass blade or trimmer head to cut
grass.
Note: National or local regulations may regulate the use.
Comply to given regulations.
27. Drive disc
28. Harness
Symbols on the product
(Fig. 2)
(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6)
(Fig. 7)
(Fig. 8)
(Fig. 9)
WARNING! This product is dangerous.
Injury or death can occur to the operator or
bystanders if the product is not used
carefully and correctly. To prevent injury to
the operator or bystanders, read and obey
all safety instructions in the operator's
manual.
Please read the operator's manual carefully
and make sure that you understand the
instructions before use.
This product complies with applicable EC
Directives.
Use a protective helmet in locations where
objects can fall on you. Use approved
hearing protection. Use approved eye
protection.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
The product can cause objects to eject,
which can cause injury.
Maximum speed of the output shaft.
1542 - 002 - 17.07.2020