Resetting The Total Lamp Timer - Sharp XR-1X Serviceanleitung

● Resetting the total lamp timer
When replacing the lamp, reset the total lamp timer in the procedure below.
Lamp
■ It is recommended that the lamp (sold separately) be replaced when the remaining lamp life becomes 5% or less,
or when you notice a significant deterioration in the picture and color quality. The lamp life (percentage) can be
checked with the on-screen display.
■ Purchase a replacement lamp of type AN-XR1LP from your place of purchase, nearest Sharp Projector Dealer or
Service Center.
■ The warning lights (ON/STANDBY button, lamp indicator and temperature warning indicator) on the projector
indicate problems inside the projector.
■ If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the
projector will enter the standby mode. After the projector has entered the standby mode, follow the procedures
given below.
Downloaded from www.Manualslib.com

RESETTING THE TOTAL LAMP TIMER

manuals search engine
23
XR-1X