Panasonic AW-E750E Bedienungsanleitung Seite 69

2. Zebra Level Setting [Level: 70 % to 110 %]
This enables the zebra pattern to be displayed so that
it will provide as a general guideline for the luminance
level.
K It can be set when "ON" has been selected as the
zebra indicator setting (-1).
3. Safety Zone Setting [Safety Zone: OFF, 1, 2, 3, 4, 5]
This is used to select the type of safety zone which
is displayed on the viewfinder. A safety zone is not
displayed when "OFF" is selected.
K The safety zone and centre marker indicate
electrical positions and, as such, they may be at
variance with their optical positions.
1 2
4 5
The inside and outside frames denote safety zones of
about 90 % and about 95 %, respectively.
4. EVF Output Setting [EVF Output: Y, CVBS]
5. Auto Focus [Auto Focus: OFF, ON]
3
- 68 (E) -
This is used to set the signals to be output to the
viewfinder.
Y: The luminance signal is output to the viewfinder.
CVBS: The colour signals are output to the viewfinder.
K When "CVBS" has been selected as the setting,
the zebra pattern will not be displayed on the
viewfinder.
This enables auto focus ON and OFF to be controlled
when the zoom/focus cable of a Canon AF lens has
been connected to the ZOOM/FOCUS connector of
the optional card.