Panasonic AW-E750E Bedienungsanleitung Seite 59

7. Gain Setting
[ Gain: Auto, 0 dB to 30 dB, N/Eye L, N/Eye H]
(models AW-E750, AW-E655, AW-E650)
[ Gain: Auto 0 dB to 30 dB, N/Eye]
(model AW-E350)
When "Auto" has been selected as the CCD storage
time setting ( -10), the setting is kept to "Auto"
regardless of the gain setting selected here.
Auto: The light quantity is adjusted automatically.
0 dB: Under normal circumstances, this setting is
used.
1 dB to 30 dB: Use this setting while shooting
dark scenes if it is not possible to achieve a
satisfactory video output even when the lens
diaphragm is opened.
AW-E750, AW-E655, AW-E650
N/Eye L (Night Eye L): Use this setting if it is not
possible to achieve a satisfactory video output
even at 30 dB.
N/Eye H (Night Eye H): Use this setting if it is not
possible to achieve a satisfactory video output
even at the Night Eye L setting.
AW-E350
N/Eye (Night Eye): Use this setting if it is not
possible to achieve a satisfactory video output
even at 30 dB.
Notes
• Only 0 dB, 9 dB, or 18 dB, AGC LOW, AGC HIGH
can be selected in case of using the RCU.
If the lens iris switch is at MANUAL, when
operating the camera alone or when the lens iris
selector switch (IRIS button) on the RCU, ROP or
multi hybrid control panel is at AUTO, AGC may
not function.
• In the case of the multi hybrid control panel, the
gain operates at the AGC HIGH setting when
AGC is selected.
• 0 dB when the GAIN button on the multi hybrid
control panel is at 0 dB, 9 dB when it is at LOW, or
18 dB when it is at HIGH.
GAIN button
In the case of the multi hybrid control panel, the
gain setting is selected in the following sequence
every time the GAIN button is pressed: 0 dB t
LOW (9 dB) t HIGH (18 dB) t AGC (AGC HIGH).
In the case of the ROP, the gain is set using the five
buttons of O, L, M, H and AGC.
The amount by which the gain is increased
("gain up") can be set on the LCD screen of the
ROP for L, M, H and AGC.
- 58 (E) -
Multi hybrid control panel