Panasonic AW-E750E Bedienungsanleitung Seite 50

Colour Set Display
1. Chroma Level Adjustment
[Chroma Level: –3 to +3]
Chroma Level can be decreased or increased to any
of three levels each.
2. Skin Colour Adjustment [Flesh Tone: –3 to +3]
Skin colour can be decreased or increased to any of
three levels each.
3. White Balance Setting
[ White Bal: ATW, AWC A, AWC B, P SET 3 200K,
P SET 5 600K]
ATW: The white balance is automatically adjusted to
be always right.
AWC A, AWC B: Once the white balance is adjusted
with the ITEM/AWC switch on the back of the
camera, it is no longer necessary to set the white
balance again if you simply select AWC A or
AWC B, provided that the camera is used under
the same conditions.
Fine colour adjustment can be made after setting
AWC by red/blue gain adjustment in user mode or
from the RCU (ROP).
P SET 3 200K: The white balance is adjusted to
3 200K illumination.
P SET 5 600K: The white balance is adjusted to
5 600K illumination.
Note
Neither P SET 3 200K nor P SET 5 600K can
be set from the RCU, ROP or the multi hybrid
control panel.
4. ATW Speed Setting
[ATW Speed: SLOW 2, SLOW 1, MID, FAST 1, FAST 2]
ATW Speed can be set.
5. Negative/Positive Selection
[Nega/Posi: Posi, Nega]
Posi: Normal image
Nega: Image is shown reversed in darkness and
colour.
K The negative images can be shown only when the
composite signals and Y/C signals are supplied.
- 49 (E) -