Preparing The Machine For Use; Pre-Operational Checklist; Main Broom - Nilfisk SR 1601 D3 Betriebsanleitung

ENGLISH

PREPARING THE MACHINE FOR USE

WARNING!
On some points of the machine there are some adhesive plates indicating:
– DANGER
– WARNING
– CAUTION
– CONSULTATION
While reading this Manual, the operator must pay particular attention to the symbols shown on the plates.
Do not cover these plates for any reason and immediately replace them if they are damaged.

PRE-OPERATIONAL CHECKLIST

Before Each Use:
– Inspect the machine for damage, oil or coolant leaks.
– Check the engine coolant level (23) (see the relevant paragraph).
– Check the engine oil level (44) (see the relevant paragraph).
– Check the hydraulic oil level (19) (see the relevant paragraph).
– Check the fuel gauge (57), if necessary unscrew the plug (21) and refuel.
– Check that the pressure of all three tires is 85 psi (6 Bar).
– Check the air fi lter service indicator (see the relevant paragraph).
In the driver's seat:
– Be sure to understand the operating controls and their functions.
– Adjust the seat with the lever (40) to allow easy reach of all controls.
– Insert the ignition key (64) and turn it to "I":
• Check the horn (65), hour counter (56) and headlights (69, optional) for proper operation.
• Turn the ignition key (64) to "O".
– Check the parking brake (35 and 36). The brake must hold its (locked parked) setting fi rmly without easily being released
(report all defects immediately to service personnel).
Plan cleaning in advance:
– Arrange long runs with a minimum of stopping or starting.
– Allow a small amount of broom path overlap to ensure complete coverage.
– Avoid making sharp turns, bumping into posts, or scraping the side of the machine.

MAIN BROOM

Several different main brooms are available for this machine. To select the best broom for the surface and litter to be swept, contact
a Nilfi sk Retailer.
NOTE
To install the main broom, refer to Main Broom Maintenance paragraph.
16
USER MANUAL
33019216(2)2009-05 A SR 1601 D3 / LPG3 / P3