Introduction; Manual Purpose And Contents; Target; How To Store This Manual - Nilfisk SR 1601 D3 Betriebsanleitung

ENGLISH

INTRODUCTION

NOTE
The numbers in brackets refer to the components shown in Machine Description chapter.

MANUAL PURPOSE AND CONTENTS

The purpose of this Manual is to provide the operator with all necessary information to use the machine properly, in a safe and
autonomous way. It contains information about technical data, safety, operation, storage, maintenance, spare parts and disposal.
Before performing any procedure on the machine, the operators and qualifi ed technicians must read this Manual carefully. Contact
Nilfi sk in case of doubts concerning the interpretation of the instructions and for any further information.

TARGET

This Manual is intended for operators and technicians qualifi ed to perform the machine maintenance.
The operators must not carry out operations reserved for qualifi ed technicians. Nilfi sk will not be responsible for damages coming
from failure to follow these instructions.

HOW TO STORE THIS MANUAL

The User Manual must be kept near the machine, inside an adequate case, away from liquids and other substances that can cause
damage to it.

DECLARATION OF CONFORMITY

The declaration of conformity, supplied with the machine, certifi es the machine conformity with the law in force.
NOTE
Two copies of the original declaration of conformity are provided together with the machine documentation.

IDENTIFICATION DATA

The machine model and serial number are shown on the plate (10) placed on the frame.
The machine model year is written in the declaration of conformity and it is also indicated by the fi rst two fi gures of the machine
serial number.
The engine model and serial number are shown on the plate (31).
This information is useful when ordering machine and engine spare parts. Use the following table to write down the machine and
engine identifi cation data for any further reference.
MACHINE model ...............................................................................
MACHINE serial number ...................................................................
ENGINE model ..................................................................................
ENGINE serial number ......................................................................

OTHER REFERENCE MANUALS

– Engine Manual, supplied with the machine, to be considered an integral part of this Manual.
– The following Manuals are also available:
• Spare Parts List (supplied with the machine)
• Service Manual (that can be consulted at any Nilfi sk Service Center)
2
USER MANUAL
33019216(2)2009-05 A SR 1601 D3 / LPG3 / P3