Construction; Safety Information - Scheppach CFS135-20Li Original Bedienungsanleitung

of the operating instructions manual before using
it.
• Use only original parts for accessories as well as
consumables and spare parts. Spare parts can be
obtained from your scheppach retailer.
• Please quote our article numbers as well as type
and production year in all your orders.
m ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, film and small parts! There is a risk of
swallowing and suffocation!

6. Construction

Warning!
Always remove the battery pack before making
adjustments to the equipment.
Be sure to read the following information before you
put the cordless equipment into operation:
• Charge the battery pack with the charger. An empty
battery pack requires a charging period of approxi-
mately 0.5 to 1 hour.

7. Safety information

m WARNING Read all safety warnings and all in-
structions.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Keep all the safety advice and instructions in a
safe place for future reference!
The term "electrical tool" used in the safety advice
refers to electrical tools powered by mains electric-
ity (by means of a mains lead) and electrical tools
powered by rechargeable batteries (without a mains
lead).
1. Workplace safety
a. Keep your working area clean and well lit. Un-
tidy or poorly lit working areas can lead to acci-
dents.
b. Do not work with the device in potentially ex-
plosive environments in which there are in-
flammable liquids, gases or dusts. Electrical
power tools create sparks, which can ignite dusts
or fumes.
c. Keep children and other people away while
you are operating the electrical tool. Distrac-
tions can cause you to lose control of the device.
18 | GB
 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58
2. Electrical safety
a. The mains plug on the device must match the
mains socket. The plug must not be modified
in any way. Do not use an adapter plug with
devices fitted with a protective earth. Unmod-
ified plugs and matching sockets reduce the risk
of electric shock.
b. Avoid touching earthed surfaces such as
pipes, radiators, ovens and refrigerators with
any part of your body. There is an increased risk
of electric shock if your body is earthed.
c. Keep the device away from rain or moisture.
Water entering an electrical device increases the
risk of electric shock.
d. Do not use the mains lead for any purpose for
which it was not intended, e.g. to carry the
device, to hang up the device or to pull the
mains plug out of the mains socket. Keep the
mains lead away from heat, oil, sharp edges
or moving parts of the device. Damaged or
tangled mains leads increase the risk of electric
shock.
e. When working outdoors with an electrical
power tool always use extension cables that
are also approved for use outdoors. The use
of an extension cable suitable for outdoor use re-
duces the risk of electric shock.
f. Use a residual current device (RCD) for pro-
tection if operating the electrical power tool in
a moist environment is unavoidable. The use
of an RCD reduces the risk of electric shock.
3. Personal safety
a. Remain alert at all times, watch what you are
doing and always proceed with caution. Do
not use the device if you are tired or under
the influence of drugs, alcohol or medication.
One moment of carelessness when using the de-
vice can lead to serious injury.
b. Wear personal protective equipment and al-
ways wear safety glasses. The wearing of per-
sonal protective equipment such as dust masks,
non-slip safety shoes, safety helmets or ear pro-
tectors, appropriate to the type of electrical power
tool used and work undertaken, reduces the risk
of injury.
c. Avoid unintentional operation of the de-
vice. Check that the electrical power tool
is switched off before you connect it to the
mains, pick it up or carry it. Accidents can hap-
pen if you carry the device with your finger on the
ON / OFF switch or with the device switched on.
d. Remove any setting tools or spanners before
you switch the device on. A tool or spanner left
attached to a rotating part of a device can lead to
injury.
e. Avoid placing your body in an unnatural po-
sition. Keep proper footing and balance at all