Pump Variants - Wilo Smart IF-Modul Einbau- Und Betriebsanleitung

en Intended use
Pump
Wilo-BL-E
Wilo-IP-E/DP-E
Wilo-IL-E/DL-E
Wilo-IL-E/DL-E
Wilo-Helix EXCEL
Wilo-MVIE/MVISE/MHIE/HELIX VE
(1.1 to 4 kW)
Wilo-MVIE/MVISE/MHIE/HELIX VE
(5.5 to 7.5 kW)
Wilo-MVIE/MVISE/MHIE/HELIX VE
(11 to 22 kW)
Table 3: Smart IF module firmware version
NOTICE
IL-E to BF series pumps cannot be operated with IF modules.
For compatibility with products not listed above, see
www.wilo.com/automation.
4.2

Pump variants

Pumps with a deviating functional scope
The functionality may differ for Stratos GIGA, Stratos GIGA B, BL-E, IP-E/DP-E and IL-
E/DL-E series pumps.
If the menu < 5.7.2.0 > "Pressure value correction" is not available on the display, you
are dealing with a variant pump. In this case, the following functions will be unavail-
able:
ƒ
ƒ
ƒ
ƒ
28
Version
≥ 1.00
≥ 3.00
≥ 4.00
Not compatible
≥ 1.00
≥ 3.00
≥ 4.00
≥ 1.00
Pressure value correction
Efficiency-optimised activation and deactivation in twin-head pumps
Flow rate trend display
Δp-v operating mode (VAR_DIFFPRESS)
Comments
LCD display
Matrix LCD display
Segment LCD display
LCD display
LCD display
LCD display
WILO SE 2020-07