Switching Off - Stihl MSA 160 C Gebrauchsanleitung

English
Hold the machine with both hands –
N
wrap hands tightly around the
handles
Make certain that the saw chain has
N
not yet been positioned for cutting
and is not touching any other
objects
Pull hand guard towards the front
N
handle until it engages audibly and
the hand guard is in the position ‚
– chain brake is released
1
2
Press trigger switch lockout (1) with
N
thumb
Depress trigger switch (2) with
N
index finger
Guide the machine into the wood
N
with the saw chain running
The motor will not run unless the hand
guard is set to ‚ and the trigger switch
lockout (1) and trigger switch (2) are
pressed at the same time.
74
Trigger switch
The motor speed can be controlled
using the trigger switch. The more the
trigger switch is depressed, the higher
the motor speed.

Switching Off

1
2
Release trigger switch (2) so that it
N
springs back into its original position
– in the original position, the trigger
switch is once again blocked by the
trigger switch lockout (1)
The coasting brake stops the saw chain.
Set the hand guard to ƒ – the saw
N
chain is blocked
During breaks and after work, remove
the battery from the machine.
MSA 160 C