en Troubleshooting
Fault
The swivel arm cannot be
opened or closed because
the tool is jammed in the
bowl.
46
Cause
Drive is not in the parked po-
sition after a safety system
has stopped processing or
the power supply has been
interrupted.
troubleshooting
Set the rotary switch to
1.
Eliminate the problem that caused
2.
the appliance to stop.
→ "Safety systems", Page 38
When the swivel arm is open, re-
3.
move the tool and close the swivel
arm.
Set the rotary switch briefly to and
4.
then back to
a The drive remains on for a short
time until the parked position is
reached.
.
.