Preparations; Functions; Hot Water Function; Save The Hot Water Quantity - CASO DESIGN Café Crema Touch Original Bedienungsanleitung

14.7 Preparations

Put the coffee beans into the bean container. Fill fresh water into the water tank.
If you want to use a function with milk foam then fill milk into the milk tank and conntect it
to the milk spout as decribed under assembly. Otherwise the small flap at the milk spout
must be closed.
Place a vessel under the coffee and milk spout and adjust the height accordingly.
Press to turn on the device. The coffee and milk spout rinses.
Then pour the rinse water away. Clean your vessel and place it under the spout once
more.
► Do not use any unroasted, caramelised or sugar-glazed coffee beans. Do not use any
raw coffee or raw coffee blend.
► Use only cold water.
► Do not exceed the maximum amount of water indicated on the scale of water tank.
► Tip: If you want to enjoy your coffee as hot as possible, preheat the cup. You can use
the hot water function for this. Then pur the hot water away.
► Fro all function, make sure that the container does not overflow. You can stop each
function by pressing the selected button again.
► If you are not goin to use the device for a long time, you must clean and empty the
device completely, as well as remove and dry the water tank.

15 Functions

15.1 Hot water function

Place an empty vessel under the coffee and milk spout. Press
dispensed. You can now for example prepare tea with it.
► Please ensure that the water does not overflow. You can stop the flow by pressing the
button once more.

15.2 Save the hot water quantity

Press the once, when hot water is rinsed then press again and leave your finger
on the button until the desired amount of water is dispesend. Release the button. The
device will beep twice. The quantity is saved.
Minimum quantity: 25 ml, maximum quantity: 250 ml
Please note
Please note
and hot water will be
65