Rinsing Processes; Set The Grinding Degree - CASO DESIGN Café Crema Touch Original Bedienungsanleitung

Flashing: Bean container is empty. Beans have to be refilled.
Constantly illuminated: Coffee grounds container is full, empty the container
Flashing: Coffee ground container and the drip tray are not placed correctly. Please place
correctly.
Warning symbol, constantly illuminated: Brewing unit is not correctly inserted. Place
the brewing unit correctly.
Flashing: Cover cap of the brewing unit is not correctly closed. Please close correctly.
Constantly illuminated: The device must be descaled
Flashing: Descaling process is running
Constantly illuminated: The device is emptied and then switches off.

14.5 Rinsing processes

The device automatically rinses the coffee and milk spout with hot water when it is
switched on and off.
Warning: Risk of burns
► Keep distance from the device when it is in operation, so that you will not have any
contact with the hot water or splashes of water.
Manual rinsing
Press and
operation with 2 beeps) and the coffee and milk spout will be rinsed.

14.6 Set the grinding degree

► Only adjust the grinding degree if the device is grinding coffee beans, otherwise the
grinder may be damaged
► A finer degree of grinding is recommended for a lighter roast. A coarser degree of
grinding is recommended for a darker roast.
Place a vessel under the spout.
Open the bean container lid. Proceed as described in "Espressos &
coffee function".
Wait until the device grinds the beans. Set the grinder knob to the
desired level. Reattach the lid of the bean container.
together for approx. 5 seconds (until the device confirms the
Please note
64