Before First Use - CASO DESIGN Café Crema Touch Original Bedienungsanleitung

► Do not touch the area behind and above or behind and beneath the
► Empty the internal drip tray regularly.
Check that everything has been assembled correctly.
Warning: Risk of burns
► Only operate the device with assembled milk spout and cover, so that you will not have
any contact with the hot water or splashes of water.

14.3 Before first use

1. Clean the device as described in chapter "cleaning and maintenance", this is also
needed for the hose and milk tank.
2. Assembly the device.
3. Fill water tank and milk tank with water
4. Remove the drip tray with drip grid and place a big vessel under the spout.
5. Turn on the device.
Warning: Crushing hazard!
adjustable spout Exclusively adjust the spout as shown in the photo.
.
Please note
Place the coffee grounds container on
to the inner drip tray and push it into
the appliance. Then insert the drip tray
with the drip grid.
Adjust the adjustable coffee and milk
spout according to the selected cups /
cup size. Fill the water tank with water
and insert it.
61