6. After the automatic rinsing process press the
Confirm with
with short interuptions and cleans itself.
7. Do not leave the device unattended, as the device could switch off if you do not refill
the water tank when
off.
8. Then empty the large vessel. Fill fresh water into the water tank. To do this, remove
the water tank.
9. Rinse the milk tank thoroughly. If desired, fill milk into the tank.
10. Reassemble the device completely.
. Then
is illuminated and the device will rinse hot water
is flashing. After the cleaning process the devices switches
button together with
.
62