Schwamborn DSM 530S Originalbetriebsanleitung Seite 14

EN Floor grinding machine DSM 530S / DSM 650S / DSM 800S
Translation of the original operating manual
Manufacturer: Schwamborn Gerätebau GmbH
Robert-Bosch-Straße 8
D-73117 Wangen / Göppingen
Telephone: +49 (0)7161 2005-0
Telefax: +49 (0)7161 2005-15
E-mail: info@schwamborn.com
URL: http//:www.schwamborn.com
Document: DSM530S/650S/800S
Publishing date: 15.11.2012

Schwamborn Gerätebau GmbH
Schwamborn Gerätebau GmbH reserves all rights.
Any reproduction, use or distribution of this original
operating manual or the translations of the original
operating manual, in whole or in part, is prohibited
without the express written permission of Schwam-
born Gerätebau GmbH. If the product described here
is altered without the consent of the manufacturer,
then said manufacturer is not responsible for any da-
mage that may be incurred. Any such actions will
also void the warranty.
Contents
1 Important notes . . . . . . . . . . . . . . . . . . . . . . . . .
1.1 Symbols used . . . . . . . . . . . . . . . . . . . . . . . .
1.2 Liability and warranty
2 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2.1 Accident prevention and safety
2.2 Safety instructions
3 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.1 Starting up the machine
3.2 Operating hours counter
3.3 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.4 Switching the machine off
4 Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1 Customer service and spare parts
4.2 Set machine upright/tilt
4.3 Mounting and dismantling ETX diamond tools
4.4 Mounting and dismantling surface mills
4.5 Cleaning the machine
4.6 Checking electrical components
4.7 Final tasks . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 Acceptance and transportation
5.1 Machine acceptance
5.2 Transporting the machine
6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . .
7 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 Declaration of conformity
14
. . . . . . . . . . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . .
. . . . . . . . . . . . . . . .
. . .
. .
. . . . . . . . . . . . . . . . .
. . . . . . . .
. . . . . . . . . . .
. . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
Key to the illustrations
Pos. Fig. Name
1 A/F Guide handle
2 A/B Operating unit
3 A/F/L Guide bar
4 A Power plug (CEE 16 A)
5 A Switch box
6 A Manual valve (DSM 530S / DSM 650S)
7 A/F/G Additional weight (optional)
8 A/F Wheel
9 A/C Dust cover
10 A Tank (DSM 530S / DSM 650S)
11 A/C Safety hood
12 A Drive motor
13 B Operating hours counter
14 B EMERGENCY STOP button
15 B RESET button
16 B/K Speed regulator SPEED
17 B/D Safety cap
18 B FWD/0/REV rotary switch
19 B DUTY indicator light
20 D Safety line
15
21 E Clamping nut
15
15
22 E Locking disk
15
23 F Support (DSM 800S)
15
24 C Water connection
16
25 C Connection to the dust extraction
17
26 I Polycrystal diamond (PKD)
17
18
27 I Metal bonded diamonds
18
28 I Synthetic resin bonded diamond pads
18
29 J/K ETX locating plate
19
30 J Gearbox
19
19 31 J Recess
19
32 J ETX diamond tool
20
34 K Surface milling element
20
35 K Surface mill
20
20
36 M Stop device
20
37 M Transport eyes (DSM 800S)
20
38 H Nameplate
20
39 G Knob screw
22
40 N Spanner
23
41 N Screw
23
42 N Clamping screw