Setting Up Codes In The Installer Menu - Rotex Rkrtw Installationsanleitung

3. Setting up codes in the installer menu

You can set up codes, starting from the time and date menu (in
advanced mode).
NOTE
1 Activate the advanced mode by pressing
seconds in OFF mode (
2 Navigate to the date and clock setting menu (
>
3 Press
during 10 seconds.
y
4 Press
codes.
5 To modify codes, press
The value is flashing when being modified.
6 Press
1 step.
To put a code back to its default value, press
the same time.
7 Press
You can exit this code menu by going to the "
pressing
Installation manual
5
Downloaded from www.Manualslib.com
As a consequence of a customized configuration, it
is not abnormal that some codes are no longer
accessible.
.
>
and keep it pressed while now pressing
is displayed next to
< >
or to consult the current settings of the
+ -
or to increase or decrease the code value by
=
to save your selection.
=
.
manuals search engine
D
).
4®
.
+ - =
, or .
>
during 5
G
) by pressing
=
+ -
and at
/
" code and
RKRTW
Room thermostat
4PW50082-1