Operation; Stand-Alone Mode; Control Board - EuroLite AKKU IP UP-4 QCL Spot WDMX Tour Set Bedienungsanleitung

OPERATION

After switching on the LED uplight with the power switch, the device starts running. The unit requires a short
initialization process and is then ready for operation.
The display lights up and you can choose the desired mode via the buttons MENU, ENTER, UP, DOWN.
The device has two operating modes. It can be operated in stand-alone mode via the control board and the
EUROLITE IR-7 remote control or in DMX-controlled mode via a standard DMX controller and WDMX with
suitable wireless transmitter.
Please refer to the instructions under Control Board.

Stand-alone mode

In the stand-alone mode, you can do without a controller. Disconnect the device from the controller and call
the desired setting. Please refer to the instructions under Control Board.

Control Board

The Control Board offers several features: you can simply set the starting address, run the pre-programmed
program or select a DMX channel mode.
No Main Menu
1 Auto Show
2 Static
3 Dimmer Mode
Downloaded from www.Manualslib.com
Menu level 2
<Auto 1>
<Auto 2>
<Auto 3>
<Auto 4>
<Auto 5>
<Fixed Color>
<Manual Color>
<Off>
<Dimmer 1>
manuals search engine
Browse through the menu by pressing Menu. You can
change the selection by pressing Up or Down. Press
Enter in order to confirm. You can leave every mode
by pressing Menu. The functions provided are listed
in the following sections.
Menu level 3
Description
<100>
Internal programs
<100>
Default setting: Auto 1
<100>
Select the desired speed
<100>
001 - 100 (increasing)
Default setting: Speed:100
<100>
R
G
B
W
GB
RB
RG
Static colors
RGB
Default setting: RGBW
RW
GW
BW
RGW
RBW
GBW
RGBW
<R=255>
Dimmer intensity of LED colors
<G=255>
000 – 255 (increasing)
<B=255>
Default setting：255
<W=255>
Dimmer speed (step response)
Off : Response characteristics of LEDs
Dimmer 1: Response characteristics of
halogen lamps, fast
Dimmer 2: Response characteristics of
31/40
00106659, Version 1.0