GE ADTS 542F Sicherheitshinweise- Und Installationsanleitung Seite 7

2. ADTS Touch
The ADTS Touch is used to control all required functions. The ADTS Touch can be positioned
on the ADTS or used as a hand held mobile unit via a cable or Bluetooth® wireless technology.
The ADTS Touch will have power applied when:
• Positioned (docked) (1) on a powered-on ADTS.
• Using an umbilical cable connected to a powered-on ADTS.
• Powered from its own battery pack.
• Powered from a universal power supply unit
The ADTS Touch is equipped with an On/Off switch (2) and USB connectors for connection to
a PC or mass storage device (3).
Figure 2-2: Touch On/Off Switch and USB Connectors
© 2014 General Electric Company – All rights reserved.
Figure 2-1: ADTS Touch Docking Connector
2 3
1
ADTS Safety and Installation Guide-English | 7