Markings And Symbols; Intended Use - GE ADTS 542F Sicherheitshinweise- Und Installationsanleitung

Chapter 1. Introduction

1.1 Markings and Symbols

Symbol Description
This equipment meets the requirements of all relevant European safety directives.
The equipment carries the CE mark.
This symbol, on the equipment, indicates that the user should read the user
manual.
This symbol, on the equipment, indicates a warning and that the user should refer
to the user manual.
This symbol warns the user of the danger of electric shock.
Do not dispose of this product as household waste. Use an approved organization
that collects and/or recycles waste electrical and electronic equipment. For more
information, contact our customer service department, or your local government
office.
The Bluetooth® wireless technology word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of such marks by GE is under
license. Other trademarks and trade names are those of their respective owners.
For the list of GE approved service centers, go to:

1.2 Intended Use

Test and calibration of aircraft aeronautical pressure instruments located indoor in a hanger
or calibration laboratory or outdoor (non-continuously) on a runway, refer to User Manual
K0553 for further information.
WARNING
atmospheres. Using this equipment in a potentially explosive atmosphere
could lead to serious injury or death.
If the equipment is used in a manner not specified by this document and K0553 the
protection provided by the equipment may be impaired.
1.3 Safety
Examine all equipment to be used, paying particular attention to electrical leads and
connectors and pneumatic pipes and connectors. DO NOT use any equipment that is known
to be or suspected to be damaged or faulty.
4 | ADTS Safety and Installation Guide-English
www.gemeasurement.com
This equipment is not rated for use in potentially explosive
© 2014 General Electric Company – All rights reserved.