GE ADTS 542F Sicherheitshinweise- Und Installationsanleitung Seite 14

Chapter 3. ADTS5xxF
3.4 Cleaning
CAUTION
The following materials are approved cleaning agents:
Note: Equivalent alternatives may be used for listed items.
1. Clean the external surfaces of the unit using lint-free cloth and a soft brush. Remove
stubborn dirt using a damp cloth and mild detergent and allow to dry.
2. Clean the electrical connector using a soft brush. Remove stubborn dirt using a damp
cloth and mild detergent and allow to dry.
14 | ADTS Safety and Installation Guide-English
Do not use solvents to clean this equipment.
Material
Lint-free cloth
Damp cloth
Mild detergent
Soft brush
Specification
Commercially available
-
Commercially available
Commercially available
© 2014 General Electric Company – All rights reserved.