Displaying Tv Information; Mute Function; Pip (Picture-In-Picture) Mode; Picture Mode Selection - Schaub Lorenz 42LT601B Bedienungsanleitung

Phase
Depending on the resolution and scan frequency that
you input to the TV set, you may see a hazy or noisy
picture on the screen. In such a case you can use this
item to get a clear picture by trial and error method.
Select Phase item by using " " or " " buttons. Use
" " or " " button to adjust the value.
Dot Clock
Dot Clock adjustments correct the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs or
text in smaller fonts.
Select Dot Clock item by using " " or " " buttons.
Use " " or " " button to adjust the value.
PC Picture Menu
For adjusting PC picture items, do the following:
Press " " or " " button to select the second icon. PC
Picture menu appears on the screen.
Brightness, Contrast,
Temperature settings in this menu are identical to
settings defi ned in TV picture menu under "Analogue
TV Menu System".
Note : If you set Colour Temp as User, you can defi ne
R, G, B settings manually.
Sound Menu
The items in this menu are described at "Sound
Menu" section explained in "Menu System".
Feature Menu
Feature menu settings are identical to the settings
explained in " Feature Menu " section in " Menu
System ".
Source Menu
Source menu settings are identical to the settings
explained in " Source Menu " section in " Menu
System ".

Displaying TV Information

Programme Number , Programme Name , Sound
Indicator and Zoom Mode information is displayed
on the screen when a new programme is entered or
INFO button is pressed.

Mute Function

Press " " button to disable sound. Mute indicator will
be displayed in the upper side of the screen.
To cancel mute, there are two alternatives; the fi rst
one is pressing the " " button and the second one
is increasing the volume level.
02_[GB]_SSM_MB35_42742W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068848.indd 92 02_[GB]_SSM_MB35_42742W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068848.indd 92
Press the "PIP" button once to switch to PIP
mode.
At PIP Mode, a small picture (PIP picture) is displayed
on the main picture. There are 1 size and 4 positions
(upper left, upper right, bottom left and bottom right)
available for the PIP window.
When PIP Mode is entered, the default active
window is the PIP window and the active window
is indicated by a yellow frame around it. The
active window can be changed by pressing
" " or " " button. The status info OSD belongs
to active window. The place of the status OSDs
are same for both windows.
Press the "PIP" button again to activate PAP
mode.
At PAP Mode, two pictures with equal sizes are
Colour and Colour
displayed on the screen. Aspect Ratios of the
windows are fi xed.
When you switch to PAP Mode, main window in
PAP Mode will be displayed on the right side of
the screen. The active window can be changed
by pressing " " or " " button.
Press the
mode.
By pressing PRESETS button, you can change
Picture Mode settings in accordance with your
viewing requirements. Available options are Dynamic,
Natural, Cinema and Pixellence.
Note : This function will not be available while in PC
mode.
You can freeze the picture on the screen by pressing
the " OK " button on the remote control. Press the
" OK " button to freeze picture. Press again to quit
freeze mode.
You can change the aspect ratio (image size) of the TV
for viewing the picture in different zoom modes.
Press "SCREEN" button to directly change the zoom
mode.
Available zoom modes are listed below.
Note:
In YPbPr and HDMI modes, while in 720p-1080i
resolutions, only 16:9 mode is available.
In PC mode, only 16:9 mode is available.
English - 92 -

PIP (Picture-in-Picture) Mode

"PIP"
button again to exit the PAP

Picture Mode Selection

Freezing Picture

Zoom Modes

27.05.2010 14:31:14 27.05.2010 14:31:14