Schaub Lorenz 42LT601B Bedienungsanleitung Seite 78

Confi guration
You can confi gure the settings of your TV. Select
Confi guration from Setup menu and press OK to view
this menu. Press the BACK button on the remote
control to exit.
Dolby D Digital (* for EU countries only)
(Optional)
In the Configuration Menu, highlight the Dolby D
item by pressing " " or " " buttons. Use the " " or
" " buttons to set the Dolby D Digital as On or Off.
If the channel that you are watching supports Dolby
Digital,you can turn this setting on.
Hard of Hearing (* for EU countries only)
Use " " or " " button to select Hard of Hearing and
then press " " or " " button to set this setting as
On or Off.
If the broadcaster enables any special signal
concerning the audio, you can set this setting as On
to receive such signals.
Favourite Mode
Use this function to enable or disable favourite
mode. Press " " / " "
on or off.
Broadcast Type
When you set the desired broadcast type by using "
" or " " button, the TV will display the related channel
list. If the related source has does not include any stored
channels, "No channels for this type have been
found." message will be displayed on the screen.
Channel List
Use " " or " " buttons to go to Channel List option.
Use " " or " " buttons to toggle Channel List Mode.
If you select "TV Only", with the " " or " " buttons,
you navigate through only TV channels. If you select
"Radio Only", with the " " or " " buttons, you navigate
02_[GB]_SSM_MB35_42742W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068848.indd 77 02_[GB]_SSM_MB35_42742W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068848.indd 77
button to set this function as
English - 77 -
through only radio channels.
with the " " or " " buttons, you navigate through only
text channels. To save the recent changes and exit;
press the "MENU" button.
Active Antenna
Use " " or " " buttons to highlight Active Antenna
option.
When antenna power option is set as On by pressing
" " or " " button, +5V will be transmitted to the
antenna output.
This feature enables the use of active antenna.
Note: Antenna power should be "Off" when standard
antenna is used instead of the active antenna.
Scan Encrypted (**)
(**) For UK only.
Scan Encrypted Channel feature will always be ON
after performing first time installation. When this
setting is on, search process will locate the encrypted
channels as well. If it is set as OFF manually, encrypted
channels will not be located while in automatic search
or manual search.
Use " " or " " button to select Scan
Encrypted and then press
set this setting as On or Off.
Receiver Upgrade
Over Air Download (OAD)
To ensure that your TV always has the most update
information, use this setting. Please ensure that the TV
is set to standby mode. The TV automatically powers
up at 3.00 A.M. each day and searches for any new
information which may be broadcast and will download
this to your receiver automatically. This operation will
normally take approximately 30 minutes. If you have
an important recording to be carried out at 3.00 A.M.
and you do not want to interrupt it, disable auto OAD
search by performing the following:
• Press "MENU" button and using the " " or " "
buttons to choose Setup and press the OK button.
• Highlight Con fi guration menu with " " or " " keys
and press OK .
• Use " " or " " buttons to choose "RECEIVER
UPGRADE" and press OK button.
If you select "Text Only",
" " or " " button to
27.05.2010 14:31:04 27.05.2010 14:31:04